IHS Inc. The Source for Critical Information and Insight
China |  Change

 
 

电气和电子

IHS 全面收集了有关电气、电子以及质量、安全
和测试方面的信息。IHS 提供常规作业的理想标
准,能够帮助您保证工作符合相关法规。不管您需要的是布线设计标准还是设备性能标准,IHS 均可为您提供。

 
最常用的电气和电子标准

NEMA C119.1
电气接头封装绝缘地下连接系统,额定 600 伏
Electric Connectors Sealed Insulated Underground Connector Systems Rated 600 Volts


NEMA C12.1
电气测量;电气测量规范
Electric Meters; Code for Electricity Metering


API RP 500
一类一等和二等石油设施电气安装位置分类建议规程
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2


BSI BS EN 61000-6-2
电磁兼容性 (EMC) – 第 6-2 部分:通用标准 – 工业环境抗扰性 - 取代“BS EN 61000-6-2:1999”(该标准仍将使用)和“IEC 61000-6-2:1999”
Electromagnetic Compatibility (EMC) - Part 6-2: Generic Standards - Immunity for Industrial Environments-Supersedes BS EN 61000-6-2:1999, Which Will Remain Current; IEC 61000-6-2:1999


CEA CEA-608
21 线数据服务
Line 21 Data Services


CEA CEA-708
数字电视 (DTV) 隐藏字幕操作
Digital Television (DTV) Closed Captioning


CEA CEA-861
无压缩高速数码接口 DTV 规范
A DTV Profile for Uncompressed High Speed Digital Interfaces


CEA 310
机箱、机架、面板和相关设备
Cabinets, Racks, Panels, and Associated Equipment


EIA EIA-481
自动装配表面贴装组件 8 毫米至 200 毫米压纹载体带式封装以及8 毫米和12 毫米穿孔载体带式封装
mm Through 200 mm Embossed Carrier Taping and 8 mm & 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling


GEIA EIA-649
配置管理国家统一标准
National Consensus Standard for Configuration Management


IEC 60529
外壳防护等级 (IP 代码)
Degrees of Protection Provided by Enclosures (IP Code)


IEC 61000-4-2
电磁兼容性 (EMC) – 第 4-2 部分:测试和测量技术 – 抗静电放电测试
Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test


IEEE C2
国家电气安全规范
National Electrical Safety Code


IEEE C63.4
9 kHz 至 40 GHz 低压电子和电气设备无线噪声发射测量方法美国国家标准
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz


IPC A-610
电子元器件适用性
Acceptability for Electronic Assemblies


ECA J-STD-001
焊接电气和电子配件要求
Requirements for Soldered Electrical and Electronic Assemblies


ECA J-STD-002
组件引线、端点、焊片、接头和电线可焊接性测试
Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires


DLA MIL-STD-202
电子和电气元器件测试方法标准
Test Method Standard Electronic and Electrical Component Parts


DLA MIL-STD-883
微电路测试方法标准
Test Method Standard Microcircuits


NEMA 250
1000 伏以下电气设备封装
Enclosures for Electrical Equipment (1000 Volts Maximum)


NEMA BU 1.1
额定 600 伏或以下母线槽 (Busway) 的处理、安装、操作及维护的常规规程
General Instructions for Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less


NEMA MG 1
电动机和发电机
Motors and Generators


NEMA MW 1000
磁铁线圈
Magnet Wire


NFPA 79
工业机械电气标准
Electrical Standard for Industrial Machinery


RIA R15.06
工业机器人和机器人系统 - 安全要求
Industrial Robots and Robot Systems - Safety Requirements


TIA TIA-485
用于平衡数码多点系统的发生和接收装置的电气特性
Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems


TIA TIA/EIA-644
低压差分信号接口电路的电气特性
Electrical Characteristics of Low Voltage Differential Signaling (LVDS) Interface Circuits


本页所包含的内容译自英文版。确切含义请参阅英文版本。如有任何不一致的情形,请以英文版为准。